Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a BMW X6

Model: BMW X6 MK 1, E71 - Years 2007-2014
Part: Battery

The starting battery of the BMW X6 is located in the rear trunk area, beneath the load floor panel. Once you open the rear hatch, lift the load floor panel and support it with a stick (an umbrella works too, as shown in the video). First, remove the upper support bracket, then disconnect the terminals, the lower support bracket, and the vent tube. Next, pull out the old battery and insert the new one, connecting the vent tube first, followed by the terminals and the mounting brackets.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a BMW X6
How to Replace the Key Battery of a BMW X6
BMW X6 (2007-2014 / MK 1, E71) Start by pressing the button located on the bottom section of the key fob for your BMW X6, then pull out the physical key. Next, unclip the clip that…
How to replace the battery in the remote control of the BMW X6 F16.
How to replace the battery in the remote control of the BMW X6 F16.
BMW X6 (2014-2019 / MK 2, F16) Thanks to the few simple steps described in the following guide, you will be able to independently replace the battery located inside the remote cont…
How to Replace the Key Fob Battery for the BMW X6 E71
How to Replace the Key Fob Battery for the BMW X6 E71
BMW X6 (2007-2014 / MK 1, E71) This guide shows how to replace the battery in the key fob for the BMW X6 E71. If the vehicle is equipped with a two-sided key fob, first remove the …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos