Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the A/C Fan on BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

Replacing the A/C fan on a BMW 3 Series? Open the hood and start removing the plastic cover under the windshield. Use a screwdriver to remove the screws around the perimeter of the cover.

Once this is done, disconnect the power wires from above the fan. Remove the fan from its housing. Insert the new fan, connect the electrical terminals, and tighten the screws.

Reinstall the cover over the fan and secure it with the screws. Start the vehicle and check the operation.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (2012-2019 / F31, F30) A tutorial on how to replace the timing chain on a BMW 320 F30 is always very interesting. While changing the timing belt is a complex job, replacing…
BMW Serie 3 (2012-2019 / F31, F30) Let's see how to remove the fuses on a BMW 3 Series. Lift the hood of the engine compartment and locate the access panel on the left side. Remove the…
BMW Serie 3 (1998-2006 / E46) Replacing the air filter on a BMW 3 Series? Open the hood and let's see how to replace the filter. Locate the air filter housing on the right side of…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos