Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Replacement on BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
This video is currently unavailable

Let's see how to remove the fuses on a BMW 3 Series. Lift the hood of the engine compartment and locate the access panel on the left side.

Remove the cover in the engine compartment, then take off the plastic protective cover for the fuses. Use needle-nose pliers to pull out the damaged fuses from the compartment.

Once this is done, insert the new fuses into their designated slots in the compartment. Close the fuse box inspection cover.

Test the proper functioning of the vehicle by turning on the instrument panel. Close the engine compartment after the replacement.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) The fuses in the BMW 3 Series are located inside the designated fuse boxes within the vehicle. For the BMW 3 Series, open the trunk and lift the carp…
What is the fuse diagram and where is the fuse box located in a BMW 3 Series?
What is the fuse diagram and where is the fuse box located in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) The attached video shows the diagram and location of the fuses in our BMW 3 Series. Fuses are designed to prevent damage to the vehicle's electrical …
Where Are the Fuses in the BMW 3 Series?
Where Are the Fuses in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) The fuses in the BMW 3 Series are located inside the designated fuse boxes installed within the vehicle: the first is in the trunk, and you will need…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos