Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Side Turn Signals on BMW 3 Series E46

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Side marker bulb

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the lens of the side turn signal bulb to replace it with a new one. First, get a very thin pry tool or a flat screwdriver and extract the lens by pulling it backward, as shown in the video. At this point, the lens will detach, and you can replace it with the new one or change the bulb by pulling it out. Once the new one is installed, reconnect the electrical connector and reinsert the lens by pushing it forward to secure it!


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Replacing Side Turn Signals on BMW 3 Series E46
Replacing Side Turn Signals on BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will see simple steps to remove and replace the bulbs of the side turn signals on a BMW 3 Series E46. First, remove the t…
How to Remove the Starter Motor on the BMW 3 Series E46
How to Remove the Starter Motor on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will learn how to remove and replace the starter motor on the BMW 3 Series E46, following the instructions below. First, …
How to Reset the Oil Light on the BMW 3 Series E46
How to Reset the Oil Light on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) If the oil light appears on the instrument cluster of your BMW 3 Series E46 (model years 1998-2006) despite having already changed the oil and the co…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos