Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Interior Light Fixture of a BMW X3

Model: BMW X3 MK 2, F25 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Interior dome light bulb

See other generations:
Video tutorial

Today, you will learn how to remove the interior light fixture of a second-generation BMW X3. First, get inside the vehicle and grab a plastic trim tool or something thin to remove the plastic frame around the edges of the light fixture. Next, disengage the light fixture by inserting a flathead screwdriver into the designated holes and releasing it, as shown in the video.

At this point, disconnect the electrical connectors located on the back. You can also remove and replace any non-functioning bulbs.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Disassembly of BMW X3 ceiling light for bulb replacement.
Disassembly of BMW X3 ceiling light for bulb replacement.
BMW X3 (2010-2017 / MK 2, F25) In this video we can see how to disassemble the ceiling light of the BMW X3, in order to replace the bulb inside: first we have to remove the sun vis…
Replacing the Cabin Light Bulb in a BMW X3
Replacing the Cabin Light Bulb in a BMW X3
BMW X3 (2003-2010 / E83, MK 1) Of course, before proceeding to replace the cabin light bulb in the BMW X3 (and as should be done for any maintenance operation on a vehicle), positi…
Replacement of the rear headlight bulbs of the BMW X3
Replacement of the rear headlight bulbs of the BMW X3
BMW X3 (2010-2017 / MK 2, F25) Today's instructions will allow us to disassemble and replace the bulbs of the rear headlight of the BMW X3. First, we open the rear hatch of the tru…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos