Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Outer Handle on BMW 5

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Handle

Is the door handle damaged? Let's see how to remove the handle from the BMW 5 door. Open the door, locate the hole above the side of the door, and unscrew the screw on the side of the door with a screwdriver (as shown in the video). After removing the securing screws, take off the left or right cover of the handle, then slide the handle out from inside the door. Remove the door opening handle and install the new one. Secure the handle and tighten the screw. Open and close the door to check the operation of the new handle.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the external door handle of the BMW 5 Series.
Replacement of the external door handle of the BMW 5 Series.
BMW Serie 5 (2010-2017 / F11, F10) These short and simple steps will show us how to disassemble and replace the outer handle of the front door of the BMW 5 Series. First, we open the f…
Remove and Install the Exterior Handle on a BMW 5 Series
Remove and Install the Exterior Handle on a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Let's see how to remove and install the exterior handle located on the rear door of a BMW 5 Series. Insert a special metal key into the slot on the d…
Removing the Rear Outer Handle on a BMW 5 Series
Removing the Rear Outer Handle on a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Before accessing the outer handle, you must first remove the door panel (for this, refer to other tutorials; briefly, just unscrew the various bolts …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos