Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Lights on a BMW 3 Series F31

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Light bulb

See other generations:
Video tutorial

In this video, you will see how to replace the tail lights on a BMW 3 Series F31. Open the trunk and using a flathead screwdriver, release the cover of the tail light mounting nuts. Using a 10mm socket or T-wrench, remove the nuts; now you can detach the tail light and disconnect the electrical connector.

Once the tail light is removed, place it on a soft surface to avoid scratching the outer part of the light. Using a lever, release all the plastic clips of the bulb holder, allowing you to extract it. At this point, you can replace the bulbs for the brake light and turn signal.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light on a BMW 3 Series?
How to Replace the Rear Light on a BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) To replace the rear light on a BMW 3 Series, open the trunk and locate the fastening screws around the perimeter of the light. Use an appropriate scr…
How to Open the Stuck Trunk of a BMW 3 Series
How to Open the Stuck Trunk of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) If the trunk of your BMW 3 Series is stuck from the inside, don’t panic. On the F30 and F31 models, you can open the rear trunk in an emergency witho…
How to Remove the Rear Seats of the BMW 3 Series
How to Remove the Rear Seats of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Follow these main instructions to remove and replace the rear seats of the BMW 3 Series. First, open the rear doors and lift the rear bench seat upwa…

    Frequently Asked Questions

    • Serie 3 2005-2013 - What sidelights does the BMW 3 Series mount? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos