Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the headlight of a BMW 1 Series

Model: BMW Serie 1 F20, F21, MK 2 - Years 2011-2019
Part: Headlight

Before we can start, we will have to open the front hood of our BMW 1 Series. Let's start by disassembling and removing the front bumper, removing the gasket and unscrewing the relative fixing bolts positioned along the entire perimeter of the bumper, to disconnect the related electrical connectors. Once we have removed the bumper, we will have discovered the screws that secure the car headlight to the frame. Let's proceed then going to unscrew and remove these screws, and then we will have to disconnect the electric plug, and we will have finished the disassembly.

Posted on 5 March 2021 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlamp of a BMW 1 Series
Removing the Front Headlamp of a BMW 1 Series
BMW Serie 1 (2004-2013 / E82, E81, E87, MK 1) Want to remove the front headlamp of a BMW 1 Series? Follow these steps to proceed with the removal. Open the bonnet by pulling the bonnet release le…
How to Remove the Front Headlamp on a BMW 1 Series
How to Remove the Front Headlamp on a BMW 1 Series
BMW Serie 1 (2011-2019 / F20, F21, MK 2) See how to remove the front headlamp on a BMW 1 Series. Open the bonnet by pulling the bonnet release lever and secure it. Unscrew the fastening pins…
How to Remove the Rear Light from a BMW 1 Series
How to Remove the Rear Light from a BMW 1 Series
BMW Serie 1 (2011-2019 / F20, F21, MK 2) Are the bulbs in the rear light of your BMW 1 Series no longer working? Let's see in this video how to replace the damaged bulbs. Open the boot lid, …

Other guides you may be interested in

Removing Ignition Cylinder from Audi A3

In this video, you will see how to replace the ignition cylinder of the Audi A3. First, remove the side plastic cover where the fuses are located: take out the blue 1 Amp fuse. Next, disconnect the battery terminals. Now, connect the cables that run to the steering and remove the central part by pulling it towards you (the airbag). Disconnect the connector by removing it completely. Remove the two screws to take off the plastic cover of the ignition: disconnect the various control units and use a drill to break the seal of the ignition lock to remove it.

Watch the video!


by ScegliAuto

More videos