Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp on a BMW 1 Series

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Headlight

See how to remove the front headlamp on a BMW 1 Series. Open the bonnet by pulling the bonnet release lever and secure it. Unscrew the fastening pins on the central bar, unscrew the screws of the splash guard, and open the bumper from the side of the headlamp. Using a socket wrench, unscrew the pins around the front headlamp. Disconnect the bulb holders from the headlamp and extract the headlamp from the vehicle body. Install the new headlamp with new bulbs if damaged (always the correct type and size) and insert the headlamp into its housing. Tighten the headlamp pins with the socket wrench; reinstall the front bumper. Test the correct operation of the lights.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlamp of a BMW 1 Series
Removing the Front Headlamp of a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Want to remove the front headlamp of a BMW 1 Series? Follow these steps to proceed with the removal. Open the bonnet by pulling the bonnet release le…
How to Remove the Front Headlight of a BMW 1 Series
How to Remove the Front Headlight of a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Before you can start, open the bonnet of your BMW 1 Series. Begin by removing the front bumper, taking off the seal and unscrewing the relevant fixin…
How to replace the headlight bulb on the BMW 1 Series?
How to replace the headlight bulb on the BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) To replace the headlight bulb on the BMW 1 Series, remove the inner cover of the wheel arch corresponding to the headlight containing the bulb to be …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos