Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Emblem of a BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Manufacturer emblem

Before you can start, exit the cabin of your BMW 3 Series and head to the front of the vehicle. Begin by inserting a piece of paper into the gap between the front emblem and the hood to protect the hood from scratches. Next, insert the tip of a flathead screwdriver into the same gap, above the piece of paper. At this point, pry gently. This will disengage the emblem from its housing. Once you complete this step, you can remove the emblem completely, finishing the disassembly.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Hood Emblem of a BMW 3 Series
How to Remove the Hood Emblem of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's see how to remove and reinstall the metal emblem of a BMW 3 Series car (front hood). Lift the front hood (if screws are present), use a plastic…
Replacement of the emblem on the hood of the BMW 3 Series E90
Replacement of the emblem on the hood of the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) The round emblem of the manufacturer placed on the front hood of the BMW 3 series is exposed to the elements and impacts that can compromise its appe…
How to Replace the Manufacturer Emblem on the BMW 3 Series Steering Wheel
How to Replace the Manufacturer Emblem on the BMW 3 Series Steering Wheel
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide outlines the steps to remove and replace the manufacturer emblem located at the center of the steering wheel on the BMW 3 Series, as well …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos