Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Hood Emblem of a BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Body

Let's see how to remove and reinstall the metal emblem of a BMW 3 Series car (front hood). Lift the front hood (if screws are present), use a plastic pry tool (detach the piece with the tool) to remove the emblem (as shown in the video). Once the metal emblem is detached, take it out of its housing and prepare to install the new emblem: position the emblem perfectly in the emblem holder, push with your hands until the emblem fits securely into the holder (tighten with appropriate metal screws at the bottom). Finally, check if everything is installed perfectly.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on the BMW 3 Series
How to Replace the Serpentine Belt on the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) To replace the serpentine belt on the BMW 3 Series, open the hood to access the components inside the engine compartment. At the front, you will find…
How to Replace the Hood Lock on a BMW 3 Series E90
How to Replace the Hood Lock on a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide provides instructions for removing and replacing the hood lock on a BMW 3 Series E90. To remove the lock, you need to take off the front b…
How to Replace the Headlight Bulbs on a BMW 3 Series
How to Replace the Headlight Bulbs on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Let's see how to replace the headlight bulbs on a BMW 3 Series: Prepare to remove the plastic cover at the bottom of the fender (splash shield access…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos