Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the emblem on the hood of the BMW 3 Series E90

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Manufacturer emblem

The round emblem of the manufacturer placed on the front hood of the BMW 3 series is exposed to the elements and impacts that can compromise its appearance, eventually requiring replacement. To change it, we use a small flathead screwdriver to pry the edges, being careful to apply pressure on a cloth to avoid scratching the bodywork. Once lifted, we finish the removal job using a larger screwdriver. After removing the emblem, we clean the housing well, take the new emblem, insert the two pins into the holes, press to lock it in place, and finally remove the protective film.

Posted on 22 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Manufacturer Emblem on the BMW 3 Series Steering Wheel
How to Replace the Manufacturer Emblem on the BMW 3 Series Steering Wheel
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide outlines the steps to remove and replace the manufacturer emblem located at the center of the steering wheel on the BMW 3 Series, as well …
How to Remove the Front Emblem of a BMW 3 Series
How to Remove the Front Emblem of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before you can start, exit the cabin of your BMW 3 Series and head to the front of the vehicle. Begin by inserting a piece of paper into the gap betw…
Replacing Emblem on BMW 3
Replacing Emblem on BMW 3
BMW Serie 3 (1998-2006 / E46) Replacing the emblem mounted on the hood? Let's see how to remove it from above the hood. Get some plastic pry tools to avoid scratches, then pry bet…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos