Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the emblem of the airbag manufacturer of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Manufacturer emblem

The following steps will show us the procedure for disassembling and replacing the emblem of the manufacturer of the BMW 3 Series airbag. First, we get on board the car and start disassembling and removing the steering wheel airbag; to do this, we push on the rear holes and disconnect the electrical connector, as shown in the video. At this point, we push on the back and lever the emblem until it comes off and remove it, cleaning the base perfectly where to fix the new emblem with adhesive; once installed, we will reassemble the steering wheel airbag!

Posted on 9 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Manufacturer Emblem on the BMW 3 Series Steering Wheel
How to Replace the Manufacturer Emblem on the BMW 3 Series Steering Wheel
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide outlines the steps to remove and replace the manufacturer emblem located at the center of the steering wheel on the BMW 3 Series, as well …
Replacement of the emblem on the hood of the BMW 3 Series E90
Replacement of the emblem on the hood of the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) The round emblem of the manufacturer placed on the front hood of the BMW 3 series is exposed to the elements and impacts that can compromise its appe…
How to Remove the Hood Emblem of a BMW 3 Series
How to Remove the Hood Emblem of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's see how to remove and reinstall the metal emblem of a BMW 3 Series car (front hood). Lift the front hood (if screws are present), use a plastic…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos