Do it yourself
Frequently asked questions about cars and motorcycles

Tinting with Rear Light Film

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tail light

See other generations:
Video tutorial

To give a smoked effect to the rear lights, you can apply a tint film, available in the aftermarket pre-shaped. Clean the light thoroughly, removing any dirt residue; then apply the film adhesive spray and the film itself, ensuring the edges align perfectly; spray more adhesive to allow the squeegee to slide while adhering the film and eliminating any air bubbles: if any bubbles remain, peel back and reapply, absolutely avoid puncturing the bubble with a needle, or it will start to lift from that point in the future.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (2012-2019 / F31, F30) How do you remove the rear headlight of a BMW? Let's look at removing the rear headlight of a BMW 3 Series. Lift the trunk of the car and secure it. …
BMW Serie 3 (2005-2013 / E92, E90, E91) How to remove the headlight from a BMW 3 Series? Open the trunk and see how to disassemble it. Remove the inspection cover located on the side of the…
BMW Serie 3 (2012-2019 / F31, F30) Remove the rear light on a BMW 3 Series to replace it or to change the bulbs. Let's see how to disassemble the light. Lift the trunk lid, remove the …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos