Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Remove the rear light of a BMW 3

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Tail light
Operation: Remove the rear light of a BMW 3

How to remove the headlight of the BMW 3? Let's open the tailgate and see how it disassembles. Remove the cloth inspection cap (located on the side of the boot), unscrew the tightening nuts located on the sides of the rear light with a socket wrench. We detach the headlight from the bodywork (we disconnect the relative power supply terminals). We replace the damaged headlight and bulbs with pieces of the same size and voltage. We assemble the new headlight by proceeding backwards in the assembly operations with all the parts. At the end of the assembly we go to test the operation of the rear lights.


Posted on 20 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 1990-2001 - How do you remove the brake light switch on the BMW 3 Series E36? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos