Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to remove the passenger compartment fan of a BMW X3

BMW X3 - Video tutorial

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Interior blower
Operation: How to remove the passenger compartment fan of a BMW X3

Before we can start, we will have to go and open the front door of our BMW X3. So let's start by disassembling and removing the front wipers, unscrewing the fixing bolts. After that, we will have to go to disassemble and remove the underlying cover. By doing so, we will have reached the passenger compartment fan cover. We then proceed by going to disengage and remove the cover in question. At this point, we will have to unscrew and remove the screws that secure the fan, and then extract it from its housing. When we have completed this step, we will have to disconnect the relative electrical connector, and the disassembly will be completed.


Posted on 10 February 2024 by ScegliAuto



How to replace the cabin fan resistor of the BMW X3.
BMW X3 (2003-2010 / MK 1, E83) Below are the steps that will allow us to disassemble and replace the blower resistor of the BMW X3 cabin fan. First, we get into the vehicle on the
Where are the fuses of the BMW X3 located?
BMW X3 (2010-2017 / F25, MK 2) In the BMW X3 there are two boxes in which the fuses are contained: the first is located inside the passenger compartment, in the rear part of the gl
Where are the fuses of the BMW X3 located?
BMW X3 (2010-2017 / F25, MK 2) Every fuse of the BMW X3 is located inside one of the appropriate fuse boxes that are present inside the vehicle: in this type of car, two boxes are

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos