Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Driveshaft Support on BMW 5 Series

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Bearing

See other generations:
Video tutorial

If you don't have a lift, raise the car with a jack and place it on jack stands, but know that a lift is necessary for this job. Once the vehicle is raised, remove everything that separates you from the center shaft bearing, which includes the exhaust and the lower heat shield.

After that, disassemble the shaft by unscrewing the Torx screws present and the three central bolts.

With the shaft removed and secured in a vise, mark the position of the shaft and unscrew the various bolts until you reach the bearing, for which you will need a special puller; otherwise, it will be difficult to extract.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Replace the Driveshaft Bearing on BMW 5 Series E60
How to Replace the Driveshaft Bearing on BMW 5 Series E60
BMW Serie 5 (2003-2010 / E60, E61) In today's tutorial video, you will learn how to disassemble and replace the driveshaft bearing on the BMW 5 Series E60, following the instructions b…
Replacing Drive Shaft Flanges
Replacing Drive Shaft Flanges
BMW Serie 5 (1995-2003 / E39) It is quite common for the rubber damper flange at the two universal joints (front and rear) of the drive shaft, which connects the transmission to t…
How to Replace the Bushing on BMW 5 Series
How to Replace the Bushing on BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Hello, in this video, you will see how to replace the bushing on your BMW 5 Series. To remove the worn bushing, you need to disassemble the driveshaf…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos