Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on the BMW X3 E83

Model: BMW X3 E83, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear door panel on the BMW X3 E83 in simple steps. First, open the rear door of your vehicle and start by prying on the sides to remove the plastic cover of the grab handle.

Then, remove all the mounting screws located underneath using a Torx screwdriver, as shown in the video. Next, pry on the sides of the panel to detach it. Finally, disconnect the power connector for the window regulator and the handle cable, following the video until the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the BMW X3
How to Remove the Door Panel of the BMW X3
BMW X3 (2003-2010 / E83, MK 1) Follow these instructions to remove and replace the front door panel of the BMW X3. First, open the front door of your car and start removing the pla…
Removing the Door Panel on BMW X3
Removing the Door Panel on BMW X3
BMW X3 (2003-2010 / E83, MK 1) Remove the door panel from the BMW X3. Take off the plastic covers above the panel. Remove all the screw covers and the internal handle cover. Unscre…
Remove the Door Panel of the BMW X3
Remove the Door Panel of the BMW X3
BMW X3 (2003-2010 / E83, MK 1) How to remove the rear door panel of the BMW X3? Let's see how to take it off the door. Use a trim tool to pry up the plastic covering of the handle …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos