Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and When to Change the Timing Belt on the BMW X3 3.0?

Model: BMW X3 E83, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

See other generations:
Video tutorial

In today's video, you will see the instructions for changing and replacing the timing belt on the first generation BMW X3 with a 3.0 Diesel engine. The timing belt should typically be changed after 93,205 miles.

Replacement is not mandatory after this mileage; generally, it is advisable to check the wear condition to decide whether to replace it or not. However, it is important not to exceed the mileage indicated by the manufacturer. The video illustrates the main steps to replace the timing belt, including removing the accessory belt and taking the necessary references!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain on the BMW X3 3.0d
Replacing the Timing Chain on the BMW X3 3.0d
BMW X3 (2003-2010 / E83, MK 1) Below are the main instructions to help you remove and replace the timing chain on the BMW X3 3.0d. First, open the hood of the vehicle and start by …
How to Replace the Serpentine Belt on a BMW X3?
How to Replace the Serpentine Belt on a BMW X3?
BMW X3 (2003-2010 / E83, MK 1) Before you can start, open the hood of your BMW X3. First, unclip and remove the upper engine cover. Next, remove the belt cover to access the serpen…
How to Replace the Serpentine Belt on a BMW X3
How to Replace the Serpentine Belt on a BMW X3
BMW X3 (2003-2010 / E83, MK 1) Before you begin, open the hood of your BMW X3. Start by unclipping and removing the upper engine cover, then remove the belt cover. This will give y…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos