Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb on the BMW 1 Series?

Model: BMW Serie 1 F20, MK 2, F21 - Years 2011-2019
Part: Light bulb

In order to replace the rear light bulb on the BMW 1 Series, lift the boot lid and remove the plastic cover located immediately next to the light. Under it, there will be a bolt which, once loosened, will allow the headlight to be extracted from its housing. By releasing the retaining clips, the bulb holder can be removed from the rear of the light. The affected bulb can be replaced and reinserted into its housing. Finally, the light can also be inserted in its housing and connected to its connector.

Posted on 5 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the service belt on the BMW 1 Series?
How to replace the service belt on the BMW 1 Series?
BMW Serie 1 (2004-2013 / E82, E81, E87, MK 1) In order to replace the service belt of the BMW 1 Series, it is necessary to loosen the screws that secure the air filter box, which is located in th…
How do you replace the timing chain on the BMW 1 Series?
How do you replace the timing chain on the BMW 1 Series?
BMW Serie 1 (2011-2019 / F20, MK 2, F21) In order to replace the timing chain of the BMW 1 Series, you need to open the bonnet, so that you have access to the components inside the engine co…
How do you replace the rearview mirror cap on the BMW 1 Series?
How do you replace the rearview mirror cap on the BMW 1 Series?
BMW Serie 1 (2004-2013 / E82, E81, E87, MK 1) To be able to replace the exterior mirror cap on the BMW 1 Series, you must use a plastic object that can act as a lever. To release the hood, you ne…

Other guides you may be interested in

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos