Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Xenon Bulbs in the BMW 1 Series?

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Light bulb

In this tutorial, you will see how to install H7 Xenon bulbs in the BMW 1 Series, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by opening the bonnet, then go to the front of the first headlamp, unlock the rear metal clip, and remove the large cap. Next, disconnect the connector, unclip the retaining spring, and remove the old bulb from the housing. At this point, simply insert the replacement, connect the connector to the relevant control unit, and secure it in a convenient location. Repeat the same operation for the opposite headlamp.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light and Bulb on a BMW 1 Series
Removing the Rear Light and Bulb on a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Today, you will learn how to remove the rear light and replace its bulbs on a BMW 1 Series F20. First, open the boot lid. Then, use a socket wrench t…
How to Replace the Rear Light Bulb on a BMW 1 Series
How to Replace the Rear Light Bulb on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Are the rear light bulbs blown? Let's see how to disassemble them on a BMW 1 Series. Open the boot lid and secure it. Remove the cover of the rear li…
How to Remove the Rear Light from a BMW 1 Series
How to Remove the Rear Light from a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Are the bulbs in the rear light of your BMW 1 Series no longer working? Let's see in this video how to replace the damaged bulbs. Open the boot lid, …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos