Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 3
  6. : How to install angel eyes bulbs on the BMW 3 Series?

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Light bulb
Operation: How to install angel eyes bulbs on the BMW 3 Series?

In order to install the angel eyes bulbs on the BMW 3 Series you have to open the hood and unscrew the bolt located on the top of the headlight containing the turn signal light bulb. This will then have to be removed after disconnecting the connector; subsequently, it will be necessary to remove the glass cover of the main headlight, disengaging its clips. This will allow you to fit the angel eyes bulbs inside the headlight and connect them to the connector. Once installed, it will be possible to reinsert the glass cover and the headlight containing the arrow bulb.


Posted on 7 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 1998-2006 - How do you replace the rear light bulbs in the BMW 3 Series E46? Read Answer
    • Serie 3 2012-2019 - Why does the trunk light of the BMW 3 Series no longer work? Read Answer
    • Serie 3 2005-2013 - Where are the sidelights of the BMW 3 Series located? Read Answer
    • Serie 3 2005-2013 - Which Xenon lamp does the BMW 3 series E91 mount? Read Answer
    • Serie 3 2005-2013 - How to replace the sidelight bulbs in the BMW 3 Series? Read Answer
    • Serie 3 2005-2013 - What is the position light bulb on the BMW E90? Read Answer
    • Serie 3 2005-2013 - What sidelights does the BMW 3 Series mount? Read Answer
    • Serie 3 2005-2013 - Where are the sidelights of the BMW 3 Series located? Read Answer
    • Serie 3 2012-2019 - How much does a xenon lamp cost for the BMW 320D? Read Answer
    • Serie 3 2005-2013 - What are the sidelights on the BMW 3 Series 320d E90? Read Answer
    • Serie 3 2005-2013 - How do you replace the sidelight bulbs on the BMW 3 Series? Read Answer
    • Serie 3 2005-2013 - How much does a xenon lamp cost for BMW 3 series? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos