Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED Angel Eyes Bulb in Front Headlights

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight bulb

See other generations:
Video tutorial

To install the ANGEL EYES bulb kit in the headlights, you must completely remove the front light assembly. Obtain the kit and start with the plastic trim up to the front glass of the headlights.

Mount the two LEDs on the light guide ring. Position the ring in its place and, using a screwdriver, gently thread the connecting wires into the engine compartment.

Also position the second light guide. Connect the wires to the designated connectors and secure the wires with zip ties.

Reassemble all parts of the headlight. Repeat the same process on the other headlight.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing LED Bulbs in Angel Eyes Headlights
Replacing LED Bulbs in Angel Eyes Headlights
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the LED bulbs in the ANGEL EYES headlights, you must completely remove the wheel to access the front lighting assembly. Unscrew the screws…
How to Replace the Angel Eyes Bulb on BMW E90
How to Replace the Angel Eyes Bulb on BMW E90
BMW Serie 3 (2005-2013 / E92, E90, E91) The position light bulb for this car model, characterized by the so-called angel eyes appearance, is a special 12 Volt 6 watt bulb, with a unique sha…
How to Install Angel Eyes Bulbs on the BMW 3 Series?
How to Install Angel Eyes Bulbs on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To install the angel eyes bulbs on the BMW 3 Series, open the hood and remove the bolt located on the top of the headlight that contains the turn sig…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos