Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the "Angel Eyes" Headlight Bulbs on a BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

In this tutorial, you will see how to replace the "Angel Eyes" headlight bulbs on a BMW 3 Series E92, a very simple operation. Before proceeding, ensure that the key is not in the ignition for safety. Start by lifting the front of the vehicle and removing the wheel, then unscrew each fastening bolt of the wheel well and remove each plastic clip. Once you have access to the back of the headlight, remove the bulb cover, disconnect the corresponding connector, and pull it out. To install the replacement, simply follow the reverse procedure.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Angel Eyes Bulbs on the BMW 3 Series?
How to Install Angel Eyes Bulbs on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To install the angel eyes bulbs on the BMW 3 Series, open the hood and remove the bolt located on the top of the headlight that contains the turn sig…
Installing LED Angel Eyes Bulb in Front Headlights
Installing LED Angel Eyes Bulb in Front Headlights
BMW Serie 3 (1998-2006 / E46) To install the ANGEL EYES bulb kit in the headlights, you must completely remove the front light assembly. Obtain the kit and start with the plastic …
Replacing LED Bulbs in Angel Eyes Headlights
Replacing LED Bulbs in Angel Eyes Headlights
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the LED bulbs in the ANGEL EYES headlights, you must completely remove the wheel to access the front lighting assembly. Unscrew the screws…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos