Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on a BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Windshield wipers

Replacing the rear wiper blade on a BMW 3 Series F31 is a very simple and quick task. Let's see how to proceed in the attached video tutorial. For this replacement, you won't need any tools; just get a suitable replacement blade for your model. First, lift the wiper arm, grasp the old blade, and pull it down as shown in the video to disengage it from the pivot. Once done, take the replacement and perform the reverse operation, pushing it to lock it onto the arm's pivot. A click will confirm that the installation was successful.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
How to Replace the Shift Knob on a BMW 3 Series
How to Replace the Shift Knob on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you can start, sit in the driver's seat of your BMW 3 Series. Begin by grasping the shift knob with both hands. At this point, pull firmly tow…
Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) The fuses in the BMW 3 Series are located inside the designated fuse boxes within the vehicle. For the BMW 3 Series, open the trunk and lift the carp…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos