Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of central locking unit BMW Serie 3 E90

Model: BMW Serie 3 E90, E92, E91 - Years 2005-2013
Part: Door lock

Let's see how to disassemble the central locking of a BMW 3 Series E90, following these simple instructions. First we open the front door and we go to remove the door panel, going to remove the plastic and unscrewing the fixing screws of the panel. Once removed, disconnect the electrical connectors on the back and remove the panel covering, in order to access the lock module; at this point we extract the handle by unscrewing the side screw of the door and we also unscrew the screw of our module, extracting it from inside the door. We just have to disconnect the electrical connector and replace it!

Posted on 29 December 2021 by ScegliAuto

Video tutorial

Related tutorials

Removing the door lock actuator on the BMW 3 Series E90 - Z3
Removing the door lock actuator on the BMW 3 Series E90 - Z3
BMW Serie 3 (2005-2013 / E90, E92, E91) In this video tutorial we will see how to remove the front door actuator on the BMW 3 Series E90, but also on the BMW E60 and the Z3. First we open t…
How to remove the driver's airbag module of the BMW 3 Series 320d E90
How to remove the driver's airbag module of the BMW 3 Series 320d E90
BMW Serie 3 (2005-2013 / E90, E92, E91) The guide shows how to remove the driver's side airbag on the BMW 320d E90. To remove the steering wheel airbag module it is necessary to find the sm…
How do you reset the central locking system of the BMW 3 Series e90?
How do you reset the central locking system of the BMW 3 Series e90?
BMW Serie 3 (2005-2013 / E90, E92, E91) The inability to open and close the central locking of one's car is often caused by a dead key battery or a broken remote control. However, this may …

How to Remove the Fuel Filter on Opel Corsa

Here's how to remove and replace the fuel filter on an Opel Corsa: Lift the car on a column lift or jack and locate the fuel filter as shown in the video. Using a socket or spanner, unscrew the securing bolts of the round plate around the filter (disconnect the wires and various hoses from the filter) and remove it from under the body. Once the filter is removed, take it out of the vehicle (replace it with a new filter). Finally, reattach the fuel filter (connect the hoses and wires) and tighten the appropriate bolts. Close the front bonnet.

Watch the video!


by ScegliAuto

More videos