Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the central locking system of the BMW 3 Series e90?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

The inability to open and close the central locking of one's car is often caused by a dead key battery or a broken remote control. However, this may also be due to a momentary error in the control unit, which can be reset by removing and reconnecting the fuse, as shown by the protagonist of the video tutorial above. To do this, open the fuse box located in the glove compartment of the dashboard, remove the fuse for the central locking system, wait a few seconds, and then reconnect it. Once the reset is complete, simply try to open and close the car with the remote control.

Posted on 18 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to repair the lock actuators of a BMW 3 Series E90
How to repair the lock actuators of a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video we can see how to repair the actuators of the central locking system of a BMW 3 Series E90 version that are not working. If the remote …
Removing the Central Locking Module from BMW 3 Series E90
Removing the Central Locking Module from BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) Follow these simple instructions to remove the central locking module from a BMW 3 Series E90. First, open the front door and remove the door panel b…
How to Permanently Disable the Start&Stop System on BMW 3 Series E90
How to Permanently Disable the Start&Stop System on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, you will see the steps to permanently disable the Start&Stop system on a BMW 3 Series E90, following the instructions below. First, ob…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos