Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the control unit of the BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Control unit

To reset the engine management control unit installed on the BMW 3 Series, you need to open the hood so that you can access the components located inside the engine compartment: here you will be able to locate the control unit on the right side of the compartment, near the intake manifold. You will need to connect a computer or a scanner to the appropriate port on it: once the connection is made, you can select the specific car model and its corresponding version, following the steps for resetting the control unit.

Posted on 24 July 2025 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1998-2006 / E46) To reset the ECU of the BMW 3 Series, access the interior of the vehicle and connect a diagnostic tool to the OBD port: this port is located at the b…
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, learn how to remove and replace the glow plugs and the glow plug module on a BMW 3 Series 320d E90 engine. First, open the ho…
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, see how to reset the window regulator module on a BMW 3 Series E90, fourth generation, by following the instructions below. First, get…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos