Do it yourself
Frequently asked questions about cars and motorcycles

Installing the Car Alternator

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Alternator

See other generations:
Video tutorial

To remove the alternator, disconnect the negative terminal of the battery, remove the belt, and locate and disconnect each electrical connection, including connectors, on the alternator. Next, remove any peripheral components that obstruct access to the alternator's mounting bolts.

Once the bolts are removed, you can slide out the alternator. Sometimes, you may need to wiggle it a bit to free it from its mounting brackets.

Be careful when removing it, as it can be quite heavy. To install the alternator, simply reverse the procedure.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) Is the alternator not charging anymore? Let's see how to remove the alternator from the engine compartment of a BMW 5 Series. Open the hood, disconne…
BMW Serie 5 (1995-2003 / E39) To replace the alternator, first disconnect the battery. Then, remove the engine air filter box (AIR BOX) to access the alternator. Next, loosen the …
BMW Serie 5 (1995-2003 / E39) When an alternator or generator (on older car models) fails to charge the battery, a red warning light, typically with a battery symbol, will illumin…

How to Activate or Deactivate 4x4 Traction on a Toyota RAV4

Below are the steps to activate or deactivate the 4x4 traction on a Toyota RAV4, following the instructions provided. First, get in the vehicle and start the engine; then press the 4x4 traction button located on the left side of the steering wheel to deactivate it. With the 4x4 traction deactivated, the warning light will illuminate on the instrument panel; simply press the button again to activate the vehicle's four-wheel drive, allowing you to tackle off-road or rough terrain.

Watch the video!


by ScegliAuto

More videos