Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Hatch Panel on the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

Today, in this video tutorial, see how to remove the rear hatch panel and the trunk release button on the BMW 3 Series. First, open the rear hatch and immediately start by removing the plastic clips located on the carpeted trim of the door itself; then, use a very thin lever to unclip and remove the hatch, as shown in the video.

At this point, proceed to remove the button by unscrewing the screws and disconnecting the electrical connector; then reassemble everything by applying the reverse procedure!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (2012-2019 / F31, F30) In this guide we will see the instructions that will allow us to disassemble and replace the rear tailgate panel of the BMW 3 Series. First of all, w…
BMW Serie 3 (2012-2019 / F31, F30) In today's tutorial video, you will learn how to remove the trunk lid panel on a BMW 3 Series F30 by following these simple steps. First, open the tr…
BMW Serie 3 (2012-2019 / F31, F30) Let's see how to install the backup camera in the trunk lid of a BMW 3 Series. First, open the trunk lid of the car, then remove the interior trim on…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos