Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Interior Lights in the BMW 1 Series F20

Model: BMW Serie 1 F21, MK 2, F20 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Interior dome light bulb

See other generations:
Video tutorial

In this video, we will see how to replace the interior lights in the BMW 1 Series F20/F21. Specifically, we will change the front and rear courtesy lights, the boot light, and the glove compartment light. Start with the front light; remove the ceiling light using a screwdriver or a pin. Now replace the bulb, which is a T10 type.

After remounting the two clips, reinsert the ceiling light into its housing. Perform the same task for the rear ceiling light, again inserting a new T10. Finally, finish the job with the glove compartment light and the boot light; both are push-fit but without the clips, making it even easier.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the BMW 1 Series F20
How to replace the headlight bulb of the BMW 1 Series F20
BMW Serie 1 (2011-2019 / F21, MK 2, F20) If you want to find out how you can replace the headlight bulb of your BMW 1 Series F20, just pay attention to the procedure described below. First, …
Where is the OBD port on the BMW Series 1 F20?
Where is the OBD port on the BMW Series 1 F20?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) If you own a BMW Series 1 F20 and want to find the OBD port to connect any compatible diagnostic tool, follow the steps in this guide. First, open th…
How to Reset the Service Light on the BMW 1 Series F20
How to Reset the Service Light on the BMW 1 Series F20
BMW Serie 1 (2011-2019 / F21, MK 2, F20) To manually reset the service light on your BMW 1 Series F20, you do not need to use professional diagnostic tools; this operation can be performed i…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos