Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the BMW 1 Series F20

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Headlight bulb

If you want to find out how you can replace the headlight bulb of your BMW 1 Series F20, just pay attention to the procedure described below. First, park your BMW 1 Series F20 safely on a flat surface, then go outside and position yourself at the wheel arch on the same side as the bulb you want to replace. At this point, remove the protective cover located in the wheel arch and unscrew the dust cap by rotating it counterclockwise. Finally, replace the faulty bulb with a new one of the same type.

Posted on 17 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Headlamp Bulb of the BMW 1 Series F20
How to Change the Front Headlamp Bulb of the BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this guide, you will learn how to correctly and quickly replace the front headlamp bulb of your BMW 1 Series F20 (2011-2019). First, park the car …
Removing Front Seat from BMW 1 Series F20
Removing Front Seat from BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this video tutorial, you will see the main steps on how to remove the front seat from a BMW 1 Series F20. First, open the rear hatch and lift the …
How to replace the headlight bulb of the BMW 1 Series
How to replace the headlight bulb of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Replacing the front right headlight bulb of the BMW 1 Series model e87 is a very simple operation to perform independently, thanks to our tutorial. T…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos