|
Do it yourself
| |||
| ||||
How to Replace the Front Headlight Bulb of the BMW 1 Series?
Model: BMW Serie 1
E82, MK 1, E87, E81
- Years:
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
The following video tutorial shows how easy and quick it is to replace the front headlight bulb of the BMW 1 Series by yourself. Open the front bonnet by pulling the release lever located under the left dashboard next to the steering wheel. Remove the cover of the light unit and disconnect the connector from the bulb. Extract the bulb and insert the new one. Reconnect the connector and close the light unit cover. If necessary, perform the same procedure for the left front headlight bulb replacement. If the bulb still does not light, check the fuse related to its operation.
Posted on 5 October 2026 by ScegliAuto
Related tutorials
BMW Serie 1
(2004-2013 /
E82, MK 1, E87, E81)
To replace the xenon bulb in the front headlamp of the BMW 1 Series, open the bonnet to access the components inside the engine bay. Here, detach the…
BMW Serie 1
(2004-2013 /
E82, MK 1, E87, E81)
Today's guide will show you the steps to remove and replace the dipped beam bulb of the front headlight on a BMW 1 Series. First, open the bonnet of …
BMW Serie 1
(2011-2019 /
F21, F20, MK 2)
In this video tutorial, you will learn how to replace the front headlamp bulb on a BMW 1 Series. First, you may want to remove the wheel on the affec…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.099
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |