Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : Replacement of the front headlight bulb of the BMW 1 Series.

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Headlight bulb
Operation: Replacement of the front headlight bulb of the BMW 1 Series.

Today's guide will show us the steps that will allow us to disassemble and replace the low beam bulb of the front headlight of the BMW 1 Series. First, we open the engine hood of our car and start removing the plastic protective cover of the bulb; then we disconnect the electrical connector and release the metal clip to remove the bulb from the headlight assembly, as shown in the video. At this point, we install the new bulb, which has the same fitting (in this case, H7 type); we make the electrical connection and reassemble everything!


Posted on 24 October 2023 by ScegliAuto



How to replace the headlight bulb on the BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) In order to replace the headlight bulb of the BMW 1 Series, you have to remove the inner cover of the wheel arch corresponding to the headlight that
Replacement of the front headlight bulb of the BMW Series 1.
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today we will see the procedure that will show us how to disassemble and replace the headlight bulb of the BMW 1 Series. First, we lift the hood of o
BMW 1 Series headlight bulb replacement
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) We replace the burned out bulbs mounted in the headlight of a BMW 1 Series. Let's see the replacement of the bulbs. We open and lift the headlight, l

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos