Do it yourself
Frequently asked questions about cars and motorcycles

Valve Guide Seal Replacement

Model: BMW Serie 5 E34 - Years: 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Valve

See other generations:
Video tutorial

When replacing the head gasket, it is good practice to also replace the valve guide seals: use the appropriate arch clamp to compress the return spring and remove the retaining caps from the stem to the retainer, then remove the retainer and spring and pull out the valve; use the extractor to remove the seal and insert the new one after lubricating it; also lubricate the valve stem before repositioning it in its seat and proceed in reverse for the spring installation.

During this operation, consider the possibility of grinding the valve seats.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) This video shows how to replace the valve cover gaskets. First, with the engine cold, remove the engine cover plastics by unscrewing the support nuts…
BMW Serie 5 (1995-2003 / E39) If you notice fluid leaks near the rear of the front right wheel (passenger side), it is likely that there is a leak from the windshield washer reser…
BMW Serie 5 (1995-2003 / E39) This guide shows how to replace the valve seal. To do this, remove all the wires and intake hoses from the upper valve cover. Then, take off the old …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos