Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling the Power Window Mechanism

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Power window motor

To disassemble the complete power window mechanism with motor, first remove the door panel. Before disconnecting the window switch connector, lower the window to access the clips that anchor the glass to the mechanism. At this point, remove the panel and the soundproofing cover, then proceed with disassembling the power window mechanism: remove the fastening rivets using a drill and a 6-8 mm bit, extract the fastening clips of the plastic sliding pads connected to the clips, unscrew the two pins, and disconnect the wiring.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Window Regulator Mechanism from the BMW 5 Series
How to Remove the Window Regulator Mechanism from the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) In this short and simple guide, you will learn how to remove and replace the window regulator mechanism of the BMW 5 Series. First, open the front or…
Instructions for Disassembling the Window Regulator Mechanism
Instructions for Disassembling the Window Regulator Mechanism
BMW Serie 5 (1995-2003 / E39) To disassemble the window regulator system, you need to remove the inner door trim panel: start by detaching the trim molding between the black and g…
Replacing the Window Regulator Mechanism on the BMW 5 Series
Replacing the Window Regulator Mechanism on the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) This guide briefly outlines the instructions for removing and replacing the window regulator mechanism on the BMW 5 Series. First, open the front doo…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos