Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Door Handle

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Handle

To remove the internal opening handle from the door panel, you need to take off the panel itself (you can search for a tutorial video on how to remove the door panel in the DIY auto section): once the panel is removed and the cable is disconnected from the lever, you can access the screws securing the speaker located right at the handle's position; at this point, using a screwdriver to pry at the front tip of the trim grille, you can detach it while also pulling away the handle connected to it.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the internal door handles of the BMW 3 Series
How to remove the internal door handles of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) In this guide, we will see the instructions that will allow us to disassemble and replace the internal handles of the BMW 3 Series door. First, we op…
How to replace the door handle of the BMW 3 Series
How to replace the door handle of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These short and simple instructions will show us the process of disassembling and replacing the interior handle of the front door of the BMW 3 Series…
How to remove the handle of the BMW 3
How to remove the handle of the BMW 3
BMW Serie 3 (1998-2006 / E46) Remove the exterior door handle of the BMW? Let's disassemble the Series 3 handle, let's see. We move the plastic cover to the top of the door, unscr…

Other guides you may be interested in

How to Replace the Front Headlights on the Opel Antara

First, release the bonnet using the lever to lift it and secure it with the prop rod. Then, remove the clips from the top of the black panel above the bumper to lift it out. Proceed to remove the bolts securing each headlight. Lift the headlight by disconnecting the parts that hold it at the back. If you only need to replace the bulbs, remove the rear covers and replace the bulbs individually. To replace the entire headlight, simply disconnect the connector at the back.

Watch the video!


by ScegliAuto

More videos