Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Door Handles of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Handle

See other generations:
Video tutorial

In this guide, you will find instructions to remove and replace the interior door handles of the BMW 3 Series. First, open the front door of the vehicle and use thin plastic levers to detach the plastic cover located under the grab handle.

Then, unscrew the screws underneath using a wrench or Torx screwdriver, as shown in the video. Now, remove the cover of the grab handle, then proceed to take off the door panel.

Next, remove the grab handle and, if necessary, the release handle as well, finally reassembling everything!


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Handle on a BMW 3 Series
How to Replace the Interior Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In today's video, you will learn how to replace the interior handle on the door panel of a BMW 3 Series. This guide also applies to other contemporar…
How to Remove the Headliner of the BMW 3 Series
How to Remove the Headliner of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) The instructions in this guide will show you the procedure for removing and replacing the headliner or interior roof lining of the BMW 3 Series. Firs…
How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today, learn how to replace the adhesive cover of the interior handle on a BMW 3 Series yourself. To perform this simple task, get inside the vehicle…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos