Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Handle on a BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

In today's video, you will learn how to replace the interior handle on the door panel of a BMW 3 Series. This guide also applies to other contemporary models from the Bavarian manufacturer.

First, detach the interior trim of the handle. Next, remove the screws and then extract the entire door panel, making sure to disconnect the power connector.

Now, remove the worn handle from the door panel and proceed to install the new unit. At this point, reassemble the door panel by following the steps completed earlier.

This operation can be done quickly and independently.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Handle of the BMW 3 Series?
How to Replace the Interior Handle of the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) To replace the interior handle of the BMW 3 Series, remove the chrome trim located above the handle. This will allow you to loosen the screws underne…
How to Replace the Door Handle on the BMW 3 Series
How to Replace the Door Handle on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These brief and simple instructions will show you the procedure for removing and replacing the inner door handle of the front door on the BMW 3 Serie…
How to Remove the Inner Door Handle on a BMW 3 Series
How to Remove the Inner Door Handle on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you begin, open the door of your BMW 3 Series. Start by removing and detaching the door panel, prying out and removing the inserts, then unscr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos