Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Seat Adjustment Controls

Model: BMW Serie 7 E68, MK 4, E65, E67, E66 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Center console tunnel

See other generations:
Video tutorial

Next to the center console, where the armrest and the joystick for the onboard computer controls are located, you will find the controls for the electric seat adjustment as well as buttons that allow you to save certain settings (consider a vehicle typically driven by two people of different heights); after removing the console from its position, take off the front trim to access the screws underneath that secure the seat control panel; once the screws are removed, pull the panel away from its position, lift the locking tab of the flat bands, and disconnect the connectors.

Repeat the same procedure on the other side.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Electric Seat Adjustment Information
Electric Seat Adjustment Information
BMW Serie 7 (1994-2001 / E38, MK 3) The video shows the complex mechanism for electric adjustment hidden beneath the driver seat cover. Both the cover and padding have been completely r…
How to Remove the Outside Rearview Mirror of the BMW 7 Series
How to Remove the Outside Rearview Mirror of the BMW 7 Series
BMW Serie 7 (1994-2001 / E38, MK 3) Today's information will show you how to disassemble and replace the outside rearview mirror of the BMW 7 Series in simple steps. First, open the fro…
Removing the Rear Door Panel
Removing the Rear Door Panel
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66) To remove the rear door panel, first locate the corresponding fastening screws: along the strip covering the central armrest support on the panel, th…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos