Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Glass

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Side window

To remove the rear glass of this coupe version, start by pulling off the weatherstrip from the front door, then unscrew the mounting screws of the chrome trim on the roof pillar and remove the trim itself; take off the plastic cover of the door pillar (where the seatbelt is located) and remove the two plastic caps underneath which are two nuts securing the glass; also remove the rubber cover cone of the glass opening hinge and disconnect the ball joint to free it; remove the inner weatherstrip, unscrew the nuts on the pillar, and take out the glass.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Install the Rear Window Seal on a BMW 3 Series
How to Remove and Install the Rear Window Seal on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How to remove and install the rear window seal on a BMW 3 Series? Don't worry, let's see together in this video how to proceed. Start the removal: ta…
Instructions for Disassembling the Drive Shaft
Instructions for Disassembling the Drive Shaft
BMW Serie 3 (1998-2006 / E46) To disassemble the drive shaft, lift the vehicle on a lift and first remove the exhaust pipe. Once the muffler is removed, take off the heat shield t…
Instructions for Removing the Exhaust System
Instructions for Removing the Exhaust System
BMW Serie 3 (1998-2006 / E46) If you need to remove the exhaust system, it is advisable to let the system cool completely and position the vehicle on car ramps if you do not have …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos