Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulbs on the BMW 4 Series 428i XDrive F32

Model: BMW Serie 4 F33, F36, F32, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Fog lights

See other generations:
Video tutorial

This guide shows how to replace the fog light bulbs on the BMW 4 Series 428i XDrive F32. Using an 8 mm wrench, remove the three bolts at the front of the wheel well. At this stage, it is recommended to turn the wheels in the opposite direction of the side you are working on to gain more workspace.

Move the plastic panel of the wheel well to access the rear of the fog light housing. At this point, by turning the socket counterclockwise, you can pull out the bulb.

Pressing the two tabs on the base of the connector allows you to remove the bulb. Install the new bulb by snapping the retaining tabs into place.

Reinstall the socket and screw the wheel well panel back in place. Check the proper functioning of the lights before hitting the road.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the BMW Series 4 F32.
How to replace the air filter of the BMW Series 4 F32.
BMW Serie 4 (2013-2020 / F33, F36, F32, MK 1) To correctly complete the replacement of the engine air filter in your BMW Series 4 F32, you need to follow the procedure outlined in the following g…
How to replace the battery of the remote control of the BMW Series 4 F32
How to replace the battery of the remote control of the BMW Series 4 F32
BMW Serie 4 (2013-2020 / F33, F36, F32, MK 1) If you need to replace the battery inside the remote control of your BMW 4 Series F32 by yourself, but you don't know how to do it, then just read ca…
How to Change the Battery in BMW 4 Series F32 Key Fob
How to Change the Battery in BMW 4 Series F32 Key Fob
BMW Serie 4 (2013-2020 / F33, F36, F32, MK 1) In today's video tutorial, you will see how to disassemble and replace the battery in the key fob of a BMW 4 Series F32. First, take your key fob and…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos