Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to replace the H3 type headlight bulb on the Bmw 320?

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Headlight bulb
Operation: How to replace the H3 type headlight bulb on the Bmw 320?

In the event that there are bulb malfunction problems in the car's front headlight, the following instructions must be followed for replacement: in detail, to replace the H3 type bulb of the self-adaptive headlight, open the bonnet and locate the bulb replace, with a small screwdriver, lever and lift the plastic cover of the bulb housing located above the headlight itself. Then locate the power supply terminal of the lamp and unclip it, then release the catch which blocks the bulb holder and remove it. Then replace the bulb and put it back in the housing. Finally reattach the clamp and close the lid.


Posted on 18 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the BMW 3 Series parking light bulb? Read Answer
    • Serie 3 2005-2013 - What are the position bulbs of the BMW E90? Read Answer
    • Serie 3 2005-2013 - How to remove the headlight bulb of a BMW 3 Series? Read Answer
    • Serie 3 1998-2006 - How to replace the headlight bulb on a BMW 3 Series? Read Answer
    • Serie 3 2005-2013 - Where is the position light in the BMW headlight? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos