Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a BMW 5 Series?

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Antifreeze coolant

In this tutorial, you will see how to replace the coolant in a BMW 5 Series, a very simple operation. First, open the hood and remove the front cover by unscrewing the two indicated bolts. Then, position a container under the radiator, locate the red drain plug, and unscrew it. Once all the coolant has drained out, add plain water to perform an internal flush. At this point, tighten the drain plug and add the necessary amount of coolant to reach the ideal level indicated on the expansion tank.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the coolant reservoir in the BMW 5 Series?
How to replace the coolant reservoir in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In this tutorial, we can see how to replace the coolant tank in the BMW 5 Series, an extremely simple and quick operation. First of all, we wait for …
How to Open the Coolant Reservoir Cap on BMW 5
How to Open the Coolant Reservoir Cap on BMW 5
BMW Serie 5 (2010-2017 / F11, F10) Do you want to top off the coolant in your car? Let's see how to open the cap of the coolant reservoir on a BMW 5. Lift the hood, then locate the cap…
How to Top Up the Coolant in a BMW 5 Series?
How to Top Up the Coolant in a BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) Topping up the coolant in a BMW 5 Series, as shown in this tutorial, is a very simple and quick operation. First, ensure the engine is completely col…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos