Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Reservoir in a BMW 5 Series?

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to replace the coolant reservoir in a BMW 5 Series, a very simple and quick operation. First, wait for the engine to be completely cool, then open the hood and, using the valve located at the bottom of the radiator, drain the coolant.

Next, remove the mounting bolts of the reservoir, disconnect the various hoses and the pressure sensor connector, and position the replacement part. Finally, reassemble everything by following the reverse procedure and refill with the drained coolant.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Top Up the Coolant in a BMW 5 Series?
How to Top Up the Coolant in a BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) Topping up the coolant in a BMW 5 Series, as shown in this tutorial, is a very simple and quick operation. First, ensure the engine is completely col…
How to Replace the AdBlue Tank on a BMW 5 Series?
How to Replace the AdBlue Tank on a BMW 5 Series?
BMW Serie 5 (2017-2024 / G30) To replace the AdBlue tank, lift the car using a lift and loosen all the screws securing the cover on the underside of the vehicle near the trunk are…
Guide to Removing the AdBlue Tank from the BMW 5 Series
Guide to Removing the AdBlue Tank from the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, let's go through the main steps for removing and replacing the AdBlue tank from the BMW 5 Series, following the instructions below. First, lif…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos