Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the AdBlue Tank on a BMW 5 Series?

Model: BMW Serie 5 G30 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: AdBlue warning light

See other generations:
Video tutorial

To replace the AdBlue tank, lift the car using a lift and loosen all the screws securing the cover on the underside of the vehicle near the trunk area. Next, remove the right rear tire to access the inner cover of the wheel well and loosen all its mounting bolts.

By removing the cover, you will gain access to the screws that secure the additional fluid tank. After loosening all the screws and disconnecting hoses and connectors, you can remove the tank and replace it with a new replacement part.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Guide to Removing the AdBlue Tank from the BMW 5 Series
Guide to Removing the AdBlue Tank from the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, let's go through the main steps for removing and replacing the AdBlue tank from the BMW 5 Series, following the instructions below. First, lif…
How to Replace the Fuel Pump on a BMW 5 Series
How to Replace the Fuel Pump on a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) This guide outlines the steps to remove and replace the fuel pump on a BMW 5 Series, following the instructions below. First, open the rear doors and…
How to Remove the Fuel Pump from the BMW 5 Series
How to Remove the Fuel Pump from the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Today's main information will show you how to remove and replace the low-pressure fuel pump of the BMW 5 Series. First, open the rear doors and start…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos