Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Removing the AdBlue Tank from the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: AdBlue warning light

See other generations:
Video tutorial

Today, let's go through the main steps for removing and replacing the AdBlue tank from the BMW 5 Series, following the instructions below. First, lift the vehicle and locate the AdBlue tank, which is situated at the rear; then disconnect the electrical connector from the AdBlue sensor and disconnect the fluid line, as shown in the video.

At this point, remove the mounting screws for the fluid tank, taking it out and replacing it with a new one if necessary; apply the reverse procedure for reassembly!


Updated on 22 August 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2010-2017 / F11, F10) In this video we can see how to reset the AdBlue warning light on a BMW 5 Series F11: the car is showing the AdBlue error and unfortunately the only …
BMW Serie 5 (2003-2010 / E60, E61) In the BMW 5 Series, it may happen that the fuel door gets stuck, for example due to a problem with the control button or the lock actuator. In these…
BMW Serie 5 (2003-2010 / E60, E61) Today's main information will show you how to remove and replace the low-pressure fuel pump of the BMW 5 Series. First, open the rear doors and start…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos