Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Console of the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Center console tunnel

See other generations:
Video tutorial

To remove the center console of the BMW 3 Series, start by pulling out the ashtray located just behind the armrest: this will provide access to the screws underneath that need to be loosened. This way, the central part of the panel can be removed, and by accessing all the screws underneath, you can also remove the rear part of the console.

Next, proceed to detach the front part of the console: this can be removed by lifting the shift boot and prying from inside its housing. By disconnecting all the internal clips and the underlying connectors, you can remove all the panels that make up the console and replace them with new pieces.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

Removing the Center Console of BMW E46
Removing the Center Console of BMW E46
BMW Serie 3 (1998-2006 / E46) Want to remove the pieces of the center console from a BMW 3 Series? Let's see how to disassemble it. Position the gear shift knob vertically (remove…
How to disassemble the console and central tunnel of the BMW 3 Series
How to disassemble the console and central tunnel of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Below we will discover the information that will allow us to dismantle and replace the tunnel and central console of the BMW 3 Series. First, we get …
How to Remove the Center Console Trim Panel on a BMW 3 Series
How to Remove the Center Console Trim Panel on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to remove the center console trim panel on a BMW 3 Series. Position the gear shift knob vertically, then use a plastic pry tool to remo…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos