Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Center Console of BMW E46

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Center console tunnel

See other generations:
Video tutorial

Want to remove the pieces of the center console from a BMW 3 Series? Let's see how to disassemble it. Position the gear shift knob vertically (remove the trim if necessary), then use a plastic pry tool to remove the cover located at the bottom of the center console.

After removing the plastic cover, unscrew the screws under the removed trim and at the rear of the console.

Once this is done, pull off the flip-up armrest and then remove all the plastic from the center console.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Disassembling Central Console BMW 3 Series E46
Disassembling Central Console BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will learn how to disassemble the center tunnel of a BMW 3 Series E46. First, get in the vehicle and remove the cup holde…
Removal/Replacement of the Center Console Storage Compartment
Removal/Replacement of the Center Console Storage Compartment
BMW Serie 3 (1998-2006 / E46) In this short video, you can see how to replace the storage compartment between the seats of the BMW 3 Series E46. The replacement does not require t…
Removing the Center Console Cover
Removing the Center Console Cover
BMW Serie 3 (1998-2006 / E46) To remove the rear part of the center console, where the armrest is located, start by removing the rear ashtray and unscrewing the screws underneath …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos