Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Center Console Cover

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Center console tunnel

See other generations:
Video tutorial

To remove the rear part of the center console, where the armrest is located, start by removing the rear ashtray and unscrewing the screws underneath to extract the ashtray housing. Below this, you will find more screws; once the rear part is free, detach the trim frame to access the armrest mounting system.

This consists of a spring that, when released, allows you to remove the plastic pin securing the armrest. Next, remove the fastening pin of the armrest support bracket, detach the cover boot of the gear lever, unscrew the screws underneath, and complete the removal of the console cover by also detaching the boot of the parking brake lever.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Removing the Center Console of BMW E46
Removing the Center Console of BMW E46
BMW Serie 3 (1998-2006 / E46) Want to remove the pieces of the center console from a BMW 3 Series? Let's see how to disassemble it. Position the gear shift knob vertically (remove…
How to Replace the Center Console in Your Car
How to Replace the Center Console in Your Car
BMW Serie 3 (1998-2006 / E46) This guide shows how to replace the center console in your vehicle. Various tools and components are supported in this part of the car. How do you re…
How to Remove the Center Console Trim Panel on a BMW 3 Series
How to Remove the Center Console Trim Panel on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to remove the center console trim panel on a BMW 3 Series. Position the gear shift knob vertically, then use a plastic pry tool to remo…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos